Tools and materials:
-Angle;
-Clamps;
-Milling cutter;
-Joiner's glue;
-Circular saw;
– Circular saw ;
-Band saw;
-Drilling machine;
-Marker;
-Painting tape;
-Chimmer;
-Orbital sander;
-Mineral oil;
-Lumber; < br> Step one: procurement
To make the ashtray, the master decided to take a walnut board. The nut is known for its beautiful texture.
Cut out four squares from the board.
Then he glues the blanks.
Step two : markup
After gluing, removes the clamps and marks the center of the workpiece.
circle using a template.
Marks the outer circle with compasses.
Step three : central hole
Next, using a Forstner drill, drills the central hole.
You cannot completely remove the material, and then you need a router.
Glues masking tape to the bottom of the blank and to the desktop.
tape around the hole and to the template.
glue on adhesive tape and sticks the blank to the table.
Glues the blank .
Cut out the remaining material with a milling cutter.
Then it removes the template and processes it cleanly.
Step four: trimming
Cleans the workpiece from glue residues and trims the workpiece.
Step five: cigar cuts
Now you need to make semicircular cigar cuts.
Marks four cigar slots.
He presses the board to the workpiece with clamps.
Drills a hole.
Then he sets the board on the other side and drills the rest of the holes.
Step six: trimming and grinding
Cuts the outer circle with a band saw.
< a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615109176_1-70.jpg" rel = "prettyPhoto">
Grinding an ashtray.
Cut off the outer edge with a milling cutter.
Grinds again.
Step Seven: Covering and Stamp
White rubbing the ashtray with alcohol.
Burns a stamp at the bottom of the ashtray.
Covers the ashtray mineral oil.
Now everything is ready.
The whole process how to make such an ashtray can be seen in the video.
