DIY

Universal chipper (wood chip cutter) with screw log splitter

Universal chipper (wood chip cutter) with screw log splitter What can a person look at for a very long time? Who knows the answer? I agree, on water, on fire and on how another, like us, works. Especially if that other master of his craft. I have looked through more than one project in his performance, It seems that he works not with metal, but with wood, he does it so easily, he chopped off there, glued it there. Here, at least take his product “iron woodcutter”. This is not from the fairy tale “the wizard of the emerald city”, but a real apparatus that is able to chop like an ax four cm thick branches and, if necessary, chop wood with a cone. On a personal plot, an irreplaceable assistant in the household.
Universal chipper (wood chip cutter) with a screw log splitter How did the author implement his idea? First of all, he believes that the project should not be expensive and was created from available materials. Secondly, success depends on good tools and machines, as little manual labor as possible, this also makes the product cheaper.
For the case, a 12×250 mm metal strip was used. Thick metal gives the structure strength and rigidity. The first part that was sawn off on the machine is the base of the body. The length of the workpiece is 370 mm, marking was made on it for fastening and holes were drilled with a portable drilling machine on an electromagnetic mount.
Universal chipper (wood chip cutter) with a screw log splitter Universal chipper (wood chip cutter) with screw log splitter  Universal chipper (wood chip cutter) with a screw log splitter Universal chipper (wood chip cutter) with screw log splitter The side walls of the power unit were cut by the author from the same 210 mm high strip. The workpiece was marked for the UCF208 bearing yoke, which can handle overloads without any problems. For drilling accuracy, the workpieces were tacked by welding. After drilling, the workpiece was cut and cut into the holes with a tap, the author cut the thread.
Universal chipper (wood chip cutter) with a screw log splitter Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035516_13.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035499_16.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035473_18.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035458_20.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035503_23.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter Marking, drilled and tapped on the same parts.
Universal chipper (wood chip cutter) with screw log splitter Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035505_26.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with a screw log splitter At the same time, the top cover of the box 190 mm long was sawn off from the strip on the machine.
Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035463_30.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter [/center
The “woodcutter” power unit is assembled by welding, which is reinforced with a 60×12 mm strip. At the top.
[center] Universal chipper (wood chip cutter) with a screw log splitter Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035511_36.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter Universal chipper (wood chip cutter) with a screw log splitter В the bearings are inserted into the prepared shaft and the fits under the sprocket and under the cone of splitting the log are calculated. On a lathe, the shaft is machined from both sides, and with the help of a savvy device, he milled two keyways with a finger mill.
Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035507_40.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035465_42.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035463_45.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter Universal chipper (wood chip cutter) with a screw log splitter From angle 40×40 on the machine, the master sawed off two pieces of 180 mm each and welded to the shaft. Marked the holes for fastening the chopping plates, drilled and cut the threads. All screws have a hardness class of 8.8.
Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035497_48.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035515_52.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035546_54.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter Universal chipper (wood chip cutter) with screw log splitter The material from which the chopping blades are made is so hard that the author immediately refused to drill and decided cut out the holes for attaching to the shaft with an angle grinder. I sharpened four knives using a device at an angle of about 60 degrees. Also, with the help of angle grinders, I got rid of rust.
Universal chipper (wood chip cutter) with screw log splitter Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035491_58.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with a screw log splitter Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035525_60.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035458_62.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter The assembly of the power unit was carried out in the following order. The first yoke with a bearing was installed on the box, a prepared shaft was wound through the remaining hole and inserted into the bearing. The second yoke, put on the shaft, was tightened with bolts on the body. The axes were secured through a plate and spring washers for greater safety.
Universal chipper (wood chip cutter) with a screw log splitter Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035531_67.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with a screw log splitter Universal chipper (wood chip cutter) with screw log splitter  Universal chipper (wood chip cutter) with a screw log splitter The frame itself for the machine is welded from a 40×40 profile pipe. Two side frames were assembled from the cut blanks, in one of which a hole was drilled in advance for the shaft for the wheels. The frames are bridged and the upper part is reinforced with prof. pipe. The power unit is reinforced with an offset to the bolts through previously drilled holes.
Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035628_3.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035654_5.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter Universal chipper (wood chip cutter) with a screw wood splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035648_7.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035660_9.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035650_12.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with a screw log splitter Universal chipper (wood chip cutter) with screw wood splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035617_15.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with a screw log splitter Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035650_18.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with a screw log splitter Universal chipper (wood chip cutter) with screw log splitter The electric motor is 3kW/4Hp 3-phase, with a gearbox that reduces the rotation of the mechanism to 200 rpm min. A mount was made for it with the ability to adjust the tension of the rotation transmission belt.
Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035578_22.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter Universal chipper (wood chip cutter) with screw log splitter  Universal chipper (wood chip cutter) with a screw log splitter Universal chipper (wood chip cutter) with screw log splitter  Universal chipper (wood chip cutter) with a screw log splitter Universal chipper (wood chip cutter) with screw log splitter A manufactured shaft was inserted into the gearbox, onto which a two in-line star was put on through an adapter. A second sprocket was similarly installed on the upper shaft and connected by a chain. At the same time, a cone was installed on the upper shaft for splitting logs.
Universal chipper (wood chip cutter) with screw log splitter  Universal chipper (wood chip cutter) with a screw log splitter Universal chipper (wood chip cutter) with screw log splitter Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035663_37.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter Universal chipper (wood chip cutter) with a screw wood splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035613_40.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter Universal chipper (wood chip cutter) with a screw log splitter Under with a cone made of a profile pipe and a metal strip, the master welded a table with a log guide. For ease of transportation, the cone and table can be easily removed and stored under the power unit.
Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035584_44.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035641_47.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035597_49.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter Universal chipper (wood chip cutter) with a screw log splitter From three millimeter sheet metal, a square cone is welded for feeding branches and for collecting crushed raw materials. They are bolted so that they can also be removed during transport.
Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035599_53.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035600_55.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with a screw log splitter After installing the protection on the belt drive and painting the device, you can start cleaning the area from branches and filling the nylon nets with fractions of four centimeters, stock up on fuel, say, for the same bath. And also to chop the rollers with a cone.
 Universal chipper (wood chip cutter) with a screw log splitter Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035577_59.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035617_61.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with a screw log splitter Universal chipper (wood chip cutter) with a screw log splitter < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615035655_63.jpg" rel = "prettyPhoto"> Universal chipper (wood chip cutter) with screw log splitter This product will be very popular if the electric motor is replaced with an internal combustion engine. You can deliver this unit directly to the forest in windbreaks, or to felling and quietly crush the wood into bags, clearing the forest and stocking up on fuel for the winter. The weight of this structure is about 150 – 200 kg.

Source:

usamodelkina.ru

Show More

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button