DIY

How to make a rotary device for panoramic time-lapse shooting

Hello, dear readers and homemade products!
To shoot interesting videos, special devices are often used that allow you to move or rotate the camera. One of the most common modes is panoramic circular shooting for a long time interval (time-lapse).
In this article, the author of the YouTube channel “soarpix.com” will tell you how to make a simple device to slowly (two hours) turn the camera around your axis. This device will be able to rotate smartphones, GoPro cameras, and even not very heavy cameras.
 How to make a rotary device for panoramic time-lapse shooting This project is very simple to make, and easy to do at home.
Materials you need for DIY.
– Mechanical watering timer for two hours
– GoPro mounts.
Tools used by the author.
– Engraving machine
– Electric soldering iron
– Hot glue gun
– Screwdriver with a set of bits, vise, < a href = "http://alii.pub/5lx98n" title = "Large selection of different files" target = "_blank"> file , hacksaw
– Tripod
– GoPro camera.
Manufacturing process.
So, the author will use this watering timer as a rotary mechanism. The upper part of this device makes almost a full revolution in two hours.
How to make a rotary device for panoramic time-lapse shooting First you need to get rid of unnecessary elements protruding beyond the body – fittings. Having fixed the body in a vice, the author cuts them off with a hacksaw, leaving a small margin for further processing.
 How to make a rotary device for panoramic time-lapse shooting How to make a rotary device for panoramic time-lapse shooting How to make a rotary device for panoramic time-lapse shooting Irregularities left over from parts are grinded with a file.
How to make a rotary device for panoramic time-lapse shooting Donyshko fixed to the case with three screws. They need to be unscrewed and the bottom removed.
How to make a rotary device for panoramic time-lapse shooting How to make a rotary device for panoramic time-lapse shooting Now you need to build a nut into the bottom, into which the tripod screw will be screwed.
To do this, you can use the articulated mount for GoPro with a nut in the sole.
The contours of the sole and the boundaries of the desired cutout are marked on the bottom.
How to make a rotary device for panoramic time-lapse shooting How to make a rotary device for panoramic time -lapse shooting  How to make a rotary device for panoramic time-lapse shooting Holding the part in a vice, the craftsman cuts a square hole using an engraving machine. You can also burn it with a soldering iron, or drill it.
 How to make a rotary device for panoramic time-lapse shooting On the inner side of the bottom, part of the valve chamber must be removed. It is no longer needed.
How to make a rotary device for panoramic time-lapse shooting How to make a rotary device for panoramic time-lapse shooting A part of the hinge mount is cut off with a hacksaw as follows.
How to make a rotary device for panoramic time-lapse shooting How to make a rotator for panoramic time -lapse shooting  How to make a rotary device for panoramic time-lapse shooting The protrusion remaining on the sole with a nut is threaded into the hole.
How to make a rotary device for panoramic time-lapse shooting < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615762945_pan-060.jpg" rel = "prettyPhoto">How to make a rotary device for panoramic time-lapse shooting To securely connect the parts together, the master melts with a soldering iron part of the plastic of the mount so as to make a bead. This operation must be performed outdoors, or under an exhaust hood. Plastic fumes are harmful to health.
How to make a rotary device for panoramic time-lapse shooting How to make a rotary device for panoramic time-lapse shooting How to make a rotary device for panoramic time-lapse shooting Almost everything is ready, you can screw the bottom to the body.
How to make a rotary device for panoramic time-lapse shooting How to make a rotator for panoramic time -lapse shooting On the top of the movement, where the dial is located, there may be a protective film. It should be removed.
A flat quick release base is glued to the center of the dial.
How to make a rotator for panoramic time -lapse shooting  How to make a rotary device for panoramic time-lapse shooting How to make a rotator for panoramic time -lapse shooting The holes remaining in the walls of the case are filled by the master with hot glue using a hot glue gun .
How to make a rotary device for panoramic time-lapse shooting How to make a rotary device for panoramic time-lapse shooting The edges are leveled again with a file. To make the product look good, the master covers the former holes with a sticker.
How to make a rotary device for panoramic time-lapse shooting < a href = "https://usamodelkina.ru/uploads/posts/2021-03/1615762952_pan-096.jpg" rel = "prettyPhoto">How to make a rotary device for panoramic time-lapse shooting Everything is ready, you can attach your GoPro camera or your smartphone to the mechanism.
 How to make a rotary device for panoramic time-lapse shooting How to make a rotator for panoramic time -lapse shooting Any suitable tripod is screwed to the bottom side.
How to make a rotary device for panoramic time-lapse shooting How to make a rotary device for panoramic time-lapse shooting How to make a rotary device for panoramic time-lapse shooting It remains to turn the timer to the desired angle, and you can start video recording.
How to make a rotary device for panoramic time-lapse shooting How to make a rotator for panoramic time -lapse shooting Thank the author for a simple but useful device for panoramic time-lapse shooting.
How to make a rotary device for panoramic time-lapse shooting Good mood, good health, and interesting ideas to everyone! < br> Subscribe to the telegram channel of the site so as not to miss new articles.
Author's video and examples of the results of such shooting can be viewed here.

Source:

usamodelkina.ru

Show More

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button