DIY

Ulu knife from saw blade + cutting board

Attention !!! This homemade product is posted for informational purposes only.
It is forbidden to create and use as cold weapons, according to Article 223.4 of the Criminal Code of the Russian Federation, imprisonment for up to two years!  Ulu knife from the saw blade + cutting board Ulu knife from the saw blade + chopping board  Ulu knife from a saw blade + cutting board Ulu knife from a saw blade + cutting board Ulu knife from the saw blade + cutting board Instead of throwing the old 30cm saw off his miter saw, the DIY master decided to make an ulu knife out of it. As a bonus, he also decided to show the process of making a cutting board for such a knife.
Tools and materials:
-Saw blade;
-Emery paper;
-A grinding wheel and polish;
-5 -minute epoxy;
-Insulating tape;
-Drills;
-Stain;
-Lumber;
-Double-sided tape;
-Fasteners;
-Angle grinder ;
-Grinding wheel;
-Drill;
-Dremel;
-Clips;
-Lathe;
-Glasses;
-Gloves;
Ulu knife from a saw blade + cutting board Ulu knife from a saw blade + cutting board Ulu knife from the saw blade + chopping board Step one: design
First of all, the master drew a drawing of a knife on a sheet of paper in life size. Then I cut out the template.
Ulu knife from a saw blade + cutting board Ulu's saw blade + chopping knife board Ulu knife from a saw blade + cutting board Ulu knife from the saw blade + chopping board Ulu knife from a saw blade + cutting board Step two: cutting the blank
Places the template on the disc and outlines. In total, three such knives can be cut from a saw blade.
Ulu knife from a saw blade + cutting board Ulu knife from the saw blade + cutting board Fixes the disk on the desktop.
Ulu knife from a saw blade + cutting board Starts cutting out the workpiece.
 Ulu knife from a saw blade + cutting board Ulu knife from a saw blade + cutting board Ulu knife from the saw blade + chopping board Now you need to cut out the middle part. Drills holes in the corners, then cuts out with an engraver. To prevent the metal from heating up, it cools it with water.
Ulu knife from the saw blade + chopping board  Ulu knife from a saw blade + cutting board Ulu knife from the saw blade + cutting board  Ulu knife from a saw blade + cutting board Removes burrs with a file.
Ulu knife from the saw blade + cutting board Step three: grinding and polishing
Using angle grinder and flap disc, grinds the disc .
Ulu knife from a saw blade + cutting board Ulu knife from the saw blade + cutting board Then polish with a polishing paste.
Ulu knife from a saw blade + cutting board Ulu knife from the saw blade + cutting board Ulu knife from a saw blade + cutting board Displays the blade.
Knife Ulu from a saw blade + cutting board Ulu knife from a saw blade + cutting board Step four: the handle
The master makes the handles of the knife from padauk.
First, he drills two holes in the handle of the knife.
 Ulu knife from the saw blade + cutting board Ulu knife from the saw blade + cutting board
Saws off two planks. Draws the shape of a pen on the slats.
Ulu knife from a saw blade + cutting board Ulu knife from the saw blade + cutting board Makes blanks.
Ulu knife from a saw blade + cutting board Ulu knife from the saw blade + chopping board Glues the workpiece on one side, then drills a hole.
Ulu knife from a saw blade + cutting board Ulu knife from the saw blade + cutting board Ulu knife from a saw blade + cutting board Ulu knife from the saw blade + chopping board Glues the second workpiece and then drills holes.
Ulu knife from the saw blade + cutting board  Ulu knife from the saw blade + cutting board Ulu knife from the saw blade + cutting board Further, so as not to scratch the blade, pastes over it with masking tape.
Ulu knife from a saw blade + cutting board Installs copper tubing into holes.
Ulu knife from a saw blade + cutting board Ulu knife from a saw blade + cutting board Step five: sanding – Now you need to sand the handle and form the desired shape. First, the master uses an angle grinder, then switches to manual grinding.
After grinding, he applies finishing material to the handle.
 Ulu knife from a saw blade + cutting board Ulu's knife from saw blade + cutting board  Ulu's knife from the saw blade + cutting board Ulu knife from saw blade + cutting board  Ulu's knife from a saw blade + cutting board Step Six: Cutting Board – As you've probably noticed, the knife has an unusual arc shape. Accordingly, it will be inconvenient for them to cut food on a regular board. Then he decided to make a board that repeats the shape of a knife. Another function of the board will be a place to store a knife.
Starts making a cutting board by sawing lumber. The board will be made of alternating maple and African mahogany.
Ulu knife from the saw blade + cutting board  Ulu knife from the saw blade + cutting board Then he glues the block and grinds after gluing.
Ulu knife from the saw blade + chopping board  Ulu knife from the saw blade + cutting board Ulu knife from the saw blade + cutting board  Ulu knife from a saw blade + cutting board Step Seven: Processing on a Lathe
Next, you need to make such a concave shape on the board.
Ulu knife from the saw blade + cutting board In order not to make mounting holes on the board, he cut another board of the same size. I fixed the faceplate on the board. On the reverse side, I glued double-sided tape around the perimeter. Then I pasted the board.
 Ulu knife from a saw blade + cutting board Ulu knife from a saw blade + cutting board Ulu knife from the saw blade + cutting board Ulu knife from a saw blade + cutting board Ulu knife from the saw blade + cutting board Sets the workpiece on the lathe and grinds the desired shape. Then it grinds and covers with mineral oil.
Ulu knife from a saw blade + cutting board Ulu knife from the saw blade + cutting board Ulu knife from a saw blade + cutting board Ulu knife from the saw blade + cutting board Step eight: compartment for storing a knife
Now you need to make a knife holder. < br> Ulu knife from the saw blade + cutting board For the manufacture of the knife holder, he used two padauk strips.
Marks an arc on one of the planks and cuts in on a band saw.
Ulu knife from a saw blade + cutting board Ulu knife from the saw blade + cutting board Ulu knife from a saw blade + cutting board Then he glues the two strips together and drills the mounting holes. Applies finishing material.
 Ulu knife from a saw blade + cutting board Ulu knife from the saw blade + cutting board  Ulu knife from the saw blade + cutting board Ulu knife from the saw blade + cutting board  Ulu knife from the saw blade + cutting board Screws the holder to the board.
Ulu knife from the saw blade + cutting board Ulu's knife is ready.
 Ulu's knife from the saw blade + cutting board Ulu knife from the saw blade + chopping board  Ulu knife from a saw blade + cutting board Ulu knife from the saw blade + cutting board  Ulu knife from the saw blade + cutting board < img class = "aligncenter" alt = "Ulu knife from a saw blade + cutting board" src = "https://usamodelkina.ru/uploads/posts/2021-03/1616091302_1-96.jpg"/> < b style = "color: red; font-size: 17px;"> Attention !!! This homemade product is posted for informational purposes only.
It is forbidden to create and use as cold weapons, according to Article 223.4 of the Criminal Code of the Russian Federation, imprisonment up to two years is threatened!

Source:

usamodelkina.ru

Show More

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button