DIY

Manual barbecue blower

Manual barbecue blower  Manual barbecue blower Manual blower for barbecue Manual barbecue blower In this article, our Siberian compatriot Ivan Beldiagin will tell us how to make an unusual instrument in the modern world, namely fur. But he makes these furs not to fan the fire in the forge, but to kindle the fire in the grill, grill, tandoor, etc.
With it, you can easily kindle a fire even in damp weather.
Tools and materials:
-Plywood 9 mm;
-Soft leather 1.5-2 mm thick;
-Sander;
– Engraver; – Furniture stapler;
– Screwdriver;
– Milling machine;
– Drill;
– Joiner's glue;
– Stain;
– Varnish for wood;
-Marker;
-Scissors;
-Carnauba wax; -Glue for leather;
-Hammer and nails with a large head;
-Double-sided tape;
-Copper tube;
– Super-glue;
– Ruler;
– Compasses;
– Tool for working with leather; Step one: blanks from plywood
For the manufacture of blanks, the master uses 9 mm plywood. If the plywood is thicker, the weight of the tool will increase, if it is thinner, then it will not be strong.
The master cuts out the blanks using a CNC milling machine. The file can be downloaded below.
Bellows.cdr
 Manual barbecue blower After cutting, the parts need to be sanded. For grinding, he uses a sander with discs 180, 320, 500, 600 grit.
Manual barbecue blower  Manual barbecue blower Bevel the handles.
Manual barbecue blower  Manual barbecue blower Manual barbecue blower  Manual barbecue blower Manual barbecue blower Step two: hole under the nozzle
On the trapezoid-shaped part, you need to make the markup as in the photo.
 Manual barbecue blower Manual barbecue blower  Manual barbecue blower Then drill a hole. The diameter of the hole must be large enough to fit a copper tube.
Manual barbecue blower Manual barbecue blower Step three: gluing
Next, he glues the overlays of the handles, a trapezoid and a rectangular overlay.
< img class = "aligncenter" alt = "Manual barbecue blower" src = "https://usamodelkina.ru/uploads/posts/2021-04/1619197763_7-1.jpg"/> Manual barbecue blower Manual barbecue blower Manual barbecue blower After gluing again grinds the parts and gives the handles the shape you need to grip.
Step Four: Stain
Now you can apply stain on the details.
 Manual barbecue blower Manual barbecue blower  Manual barbecue blower Finally, apply a coat of varnish.
Manual barbecue blower  Manual barbecue blower Step five: pattern
The pattern file can be downloaded below. It fits specifically these dimensions and 9 mm plywood. If the sizes are different, then we look at the photo and make our own pattern. The main thing is to take into account the 1 cm edge tolerances.
 Manual barbecue blower Manual barbecue blower Manual barbecue blower Manual barbecue blower Manual barbecue blower Manual barbecue blower Manual barbecue blower After making a pattern, you need to cut it out.
Manual barbecue blower Manual barbecue blower Step six: leather (main part)
Then the master puts the pattern on the skin and marks the outer contour. Folds the pattern along the indentation (1 cm inward) and marks around the perimeter again. The third line is auxiliary, it outlines the contour. The distance between the lines is 1 cm.
Manual blower for barbecue Manual barbecue blower Manual barbecue blower Now you need to cut the skin along the outer perimeter. Left and right need to indent 3-5 cm. The layer on the edge of the skin needs to be cut off. Applies glue and glues the edge, leaving the flap (see photo).
Manual barbecue blower  Manual barbecue blower Manual barbecue blower Now you need to mark the 4.5 mm line along the edge (half of the plywood thickness).
Manual barbecue blower Manual barbecue blower Step Seven: leather (front part)
Next, you need to mark the front part on the skin. To do this, the master first traced the front end, where there is a hole for the tube.
Then he traced a large trapezoid glued to the base, it is located between the base and the small trapezoid.
Above and below you need to add 1 cm.
Then draws diagonal side lines at a distance of 1 cm and vertical side lines at 2.5 cm.
 Manual barbecue blower Manual blower for barbecue Cuts further along the markings .
Manual blower for barbecue Cuts off the edge.
Manual barbecue blower Manual barbecue blower Folds and glues the edge. Punches a hole for the nozzle.
Manual barbecue blower  Manual barbecue blower Manual barbecue blower Manual barbecue blower Marks 4.5 mm lines.
Manual barbecue blower Step eight: nozzle
The master makes a nozzle from a copper tube. Tube length 20-25 cm.
Manual barbecue blower Step nine: leather (valve)
For the valve, you need to cut a disc with a diameter of 10-11 cm from the skin. Make a marking at a distance of 1 cm from the edge. Punch holes according to the marking.
Manual blower for barbecue Manual barbecue blower Manual barbecue blower Manual barbecue blower Manual barbecue blower Manual barbecue blower Manual barbecue blower  Manual barbecue blower Step Ten: Assembly
Almost all parts are ready and you can start assembling the blower.
First you need to place the disc against the hole in one of the housing half and mark the mounting holes. Then make holes with a thin drill.
Manual blower for barbecue Manual barbecue blower  Manual barbecue blower Manual barbecue blower Now you need to fasten the valve with nails with a large head. The skin should face the smooth side of the hole. Do not hammer in nails to the end. The gap between the cap and the surface must be at least 1 mm.
Manual barbecue blower Manual barbecue blower Now you need to fix the front part. First you need to glue the cutout to the second part of the case with double-sided tape.
Manual barbecue blower  Manual barbecue blower Then he marks and drills the holes. Hammers in nails (fixes the edge).
Manual barbecue blower  Manual barbecue blower Next, you need to glue the leather furs with double-sided tape to one of the wooden parts (temporary fixation), and attach the ends to the handles.
Manual barbecue blower Manual barbecue blower Manual barbecue blower Manual barbecue blower Manual barbecue blower Manual barbecue blower Folds wooden parts with handles to each other. Leather end secures. Installs and glues the copper tube.
Manual blower for barbecue Manual barbecue blower Manual barbecue blower Manual barbecue blower Manual barbecue blower Manual barbecue blower Now you need to fix the edges skin. The scheme is the same – marking, drilling holes, fixing with nails. It is advisable to grease the attachment points with leather glue.
 Manual barbecue blower Manual barbecue blower  Manual barbecue blower The edge of the skin is cut to length and also fixed with nails. Folds up the ends and also fixes them.
Manual blower for barbecue  Manual barbecue blower Manual barbecue blower  Manual barbecue blower Manual barbecue blower  Manual barbecue blower Manual blower for the barbecue Everything is ready, now you can start kindling the barbecue and frying the barbecue.
Manual barbecue blower

Source:

usamodelkina.ru

Show More

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button