DIY

Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel

Boombox with stereo speakers and WiFi channel/Bluetooth 5.0  Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel This is not the first such work of the master. Previous work is presented on the site under the name “Portable multimedia Bluetooth speaker with 7- inch screen “.
This audio unit uses a 4-inch Dayton Audio TCP115-4 woofer in combination with a Dayton Audio TD20F-4 tweeter. The speakers are powered by the Up2stream Amp V4. This small board has multiple audio inputs including Bluetooth, Aux, USB, and optical output. Music can also be streamed over the Internet from platforms such as Spotify, Deezer, and more.
Tools and materials: -Arylic amplifier board with WiFi and Bluetooth 5.0; -4-inch woofer with 4 Ohm impedance – 2 pcs; -HF speaker 4 Ohm – 2 pcs; -Audio tubes 26×95 mm – 2 pcs; -Crossover; – DC power supply 24 V, 5 A; -Remote control; -Rubber feet; -LED socket; -Threaded posts 25 mm; -M3 screws 16 mm; -Nuts М3; – Self-tapping screws M4 12 mm; -Transparent acrylic 2mm; -A tool for stripping wires; -Soldering iron; -Cordless drill; -Electric jigsaw; -Orbital grinder; -Drills; -Milling cutter; – Device for cutting circles; – Milling cutter; -Conical drill; -Forstner drills; -Corons for wood; -Kerner; -Solder; -Solder paste; -Third hand; -Leather;
-MDF;
-Joinery glue;
-Veneer ;
Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Step one: preparation of the material
First, the master developed the project of the product. Drawings can be downloaded below.
Plans.pdf
Body material – MDF 10 mm thick. You can use a board that is 12 mm or more thick, but then you will have to adjust the plans accordingly.
Now that there are printed drawings, the craftsman cut out the panels with a circular saw. Body parts can also be cut with a jigsaw, but then grinding will be required.
Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel < a href = "https://usamodelkina.ru/uploads/posts/2021-06/1623334105_1-9.jpg" rel = "prettyPhoto">Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 After all the panels were cut out, he marked the place for the amplifier.
Boombox with stereo speakers and WiFi channel/Bluetooth 5.0  Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Step two: partial assembly
After the parts are ready, you can glue them body.
Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Step three: holes
Next, cut out technological holes according to the drawings. Sand the edges with sandpaper.
Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Step four: finishing the body
The master decided to paste over the body with veneer. Cut the veneer to size.
Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Apply a layer of wood glue to the glued surface and veneer and leave to dry for about an hour … An hour later, he applies another layer and glues the veneer to the MDF.
Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Then I smoothed the surface with a warm iron and cut off the edge.
Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0  Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Having glued the veneer on all sides of the case, cuts a hole on the rear panel for the amplifier. < br> Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Then he polishes the case.
Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Covers with varnish in 3 layers.
Boombox with stereo speakers and WiFi channel/Bluetooth 5.0  Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Step five: front panel
The front panel will be covered with eco-leather. For pasting, the master applies contact cement to the panel and the inside of the leather. When the glue became sticky to the touch, he connected both surfaces, pressing the skin to all edges and protrusions.
Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Then cuts all holes.
Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Then I drilled a hole in the panel for the LED socket.
Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Then glues the front panel to the body.
 Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0  Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Step six: electronics
Now you can install crossovers inside each speaker chamber and route wires through the holes in the side panels.
 Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Now the crossovers can be glued in place and you can proceed to installing the amplifier. Before installing the amplifier inside the case, the master removes the green speaker connector and LED from the amplifier. The wires are soldered to the LED, the second ends of the wires are soldered in place of the LED.
Bends the legs at the connector 90 degrees and solders them in place.
Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel < a href = "https://usamodelkina.ru/uploads/posts/2021-06/1623334160_1-54.jpg" rel = "prettyPhoto">Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Screw the wires from the crossovers to the screw connector. Screws threaded racks onto the amplifier. Installs it in the case and connects the connector.
 Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Step Seven: Acrylic Panel
The acrylic panel will be attached to the back panel and cover the amplifier.
In step one, in the drawings, there is a template. You need to print the template and cut the panel out of it, drill holes.
Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Then it needs to be screwed into place.
 Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Step Eight: LED
Glue the LED into the holder.
< img class = "aligncenter" alt = "Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel" src = "https://usamodelkina.ru/uploads/posts/2021-06/1623334147_1-71.jpg"/> Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Step nine: speakers
Then screws the tweeters into the slots. < br> Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Before connecting the woofers to the crossover, apply some silicone around the cables to insulate the cameras.
Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Connects and fastens subwoofers.
Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Installs tubes.
 Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Now you need to glue the legs to the bottom of the speaker and connect the power.
< img class = "aligncenter" alt = "Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel" src = "https://usamodelkina.ru/uploads/posts/2021-06/1623334098_1-85.jpg"/> Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Everything is ready.
Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi channel/Bluetooth 5.0 According to the master, the device works fine, the sound is decent. It can be used, for example, as a center console under the TV.
Boombox with stereo speakers and WiFi channel/Bluetooth 5.0  Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel Boombox with stereo speakers and WiFi/Bluetooth 5.0 channel The complete assembly of such an audio device can be viewed in the video.

Source:

usamodelkina.ru

Show More

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Check Also
Close
Back to top button