DIY

RGB light for photographer

RGB light for photographers  RGB lamp for photographer In this article, an amateur photographer and at the same time a homemade photographer, will tell us how you can make an interesting device to help a photographer. Namely, it will make a wireless lamp that can be used both as a studio lighting and as a device for various lighting effects.
Tools and materials: -Perforated PCB; -LED linear light 10W; -NodeMCU v1.0 (ESP-12E); – WS2812B non-pixel LED strip; -USB Micro B connector; -3-pin male connector; -Thin enamelled copper wire; -USB A – USB Micro B cable; -External battery from 1 A; -Soldering accessories; -Cable ties; -Glue gun; -Electric drill; -Marker; -Knife;
 RGB lamp for photographer RGB light for photographer RGB lamp for the photographer Step one: preparation of the lamp and LED strip Neopixel
First you need to disassemble the LED lamp. It usually consists of two plugs and an LED controller circuit. The controller and LED strip need to be removed.
RGB light for photographers  RGB lamp for photographer Next, you need to cut off the Neopixel tape along the length of the luminaire and count the number of LEDs. This figure is useful for programming.
RGB lamp for a photographer RGB lamp for photographer Preparing end caps by making a small hole in one of them. You will need to run wires through the hole. We solder the wires to the contact pads of the LED strip. Fix the LED strip with hot melt glue.
RGB lamp for a photographer RGB light for photographers  RGB lamp for photographer RGB light for photographers Step two: circuit board
Now you need to prepare the board. First, you need to place the components on it in the most compact way.
RGB lamp for photographer RGB light for photographer RGB lamp for photographer Then cut off the excess part of the board.
RGB -light for the photographer RGB lamp for photographer RGB light for photographer  RGB light for photographer Step three: installation
Next, you need to place the parts on the board and solder the contact legs.
RGB lamp for photographer RGB lamp for photographer RGB light for photographer Produces connections according to the scheme.
RGB light for photographer RGB light for photographer  RGB light for photographer RGB light for photographers  RGB lamp for photographer RGB light for photographer  RGB lamp for photographer Step Four: Building
Then he drills two small holes in the luminaire body. Secures the board with cable ties. The board must be placed so that the connector from the LED strip can be connected to it.
 RGB lamp for photographer < a href = "https://usamodelkina.ru/uploads/posts/2021-06/1623577894_1-30.jpg" rel = "prettyPhoto">RGB light for photographer RGB light for photographer RGB lamp for photographer RGB lamp for photographer RGB lamp for photographer RGB lamp for photographer  RGB lamp for photographer RGB light for photographers Now you can cut off the excess ends of the cable ties and install the end caps.
RGB lamp for photographer RGB light for photographer Step Five: WLED: Open Source Wireless LED Controller Software
WLED software.
WLED is a fast and feature rich ESP8266/ESP32 web server implementation for driving NeoPixel LEDs (WS2812B, WS2811, SK6812) as well as SPI based chipsets such as WS2801 and APA102.
Features:
WS2812FX library is integrated for over 100 special effects
FastLED noise effects and 50 shades
Modern interface with color controls, effects and segments
Segments to set different effects and colors
Settings Page – Network Adjustment
Point Mode access and stations
Up to 10 LED outputs
RGBW strip support
Up to 250 user presets for easy saving and loading of colors/effects, and can cycle through them.
Presets can be used to automatically execute applications.
Night light function (LEDs off gradually)
Fully upgradeable OTA software (HTTP + ArduinoOTA), password protected
Customizable analog clock + support for Diamex Cronixie kit
Configurable auto brightness limit for safer operation
File system based configuration for easy backup of presets and settings
WLED page and more detailed description here
 RGB lamp for photographer RGB lamp for photographer  RGB lamp for photographer RGB light for photographers Then connects the NodeMCU to the computer using the USB A – USB Micro B cable.
Goes to device manager (START-> Search “Device Manager”) and checks the COM port.
If the COM port is missing, you need to install the appropriate driver for the microcontroller.
Next downloads the latest binary from the Github page or from the link provided here: WLED Binary.
Downloads the latest executable from the Github page or from the link: ESP Home Flasher Tool.
Opens the “ESP-HomeFlasher.exe” and select your COM port. If the port is not available, the list must be updated. Then clicks the browse button and selects the “.bin” file.
Clicks “Flash ESP” and waits for the download to complete.
When finished, close the ESP-HomeFlasher tool, but do not disconnect the NodeMCU from the computer.
RGB lamp for photographer  RGB lamp for photographer RGB light for photographers  RGB lamp for photographer RGB light for photographer RGB light for photographer Step six: connecting and configuring WLED
The next step assumes that the device is connected to a power source.
RGB light for photographers  RGB lamp for photographer Next, the master connects WIFI devices and finds the” WLED_AP “network.
Opens a web browser and enters the following address in the address bar: 4.3.2.1. Presses Enter.
The WLED welcome page should load, and two selection buttons will be presented on the screen. You don't need to configure your local Wi-Fi settings as it will use it in AP mode.
Presses the “TO THE CONTROLS” button to access the light stick controls.
On the “Colors” and “Effects” tabs, you can set the appropriate settings.
By default, the “Total LEDs” in the “LED Preferences” in the “Configuration” tab is set to 30. This number needs to be changed based on the number of LEDs. In this case, 36.
The Config tab has several configuration menus that you can use to configure WLED. For more information visit the WLED Wiki page: WLED Wiki Page
RGB lamp for photographer RGB light for photographer RGB lamp for photographer RGB light for photographer RGB lamp for photographer RGB light for photographer  RGB light for photographer All is ready. Now this device can be used for various lighting effects, lighting, etc.
 RGB lamp for photographer < a href = "https://usamodelkina.ru/uploads/posts/2021-06/1623577910_1-60.jpg" rel = "prettyPhoto">RGB lamp for photographer RGB lamp for photographer  RGB light for photographer  RGB lamp for photographer video.

Source:

usamodelkina.ru

Show More

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button