DIY

As the camera dug sand. Genius P-433

How the camera dug sand. Genius P-433 Another device from Genius P-433 came for repair, a more advanced model with a zoom lens.
Called Genius P-433
At the time of getting ready for vacation, the client discovered that there was no machine capable of capturing these unforgettable moments. The first camera that came across was urgently purchased at a low price. The holiday was a success, all activities and wonderful views were carefully filmed. But on the last day he was dropped on the beach.
At first, the comrade just wanted to throw it away, but then decided to take it to the repair in gratitude, so to speak, for the work done.
So my sand pit will start again.
And the sand is wonderful white and fine.
Although it seems simple. Disassemble, shake out, assemble. Everything is complicated by the fact that all this trifle in the process of work is terribly electrified on plastic and sticks to all places where you would not think.
Therefore, I will have to disassemble to the ground.
Preparing the tool.
In addition to the standard set, screwdrivers , tweezers, dischargers and breakers.
As the camera dug sand. Genius P-433 < a href = "https://usamodelkina.ru/uploads/posts/2021-07/1626614594_img_20210530_154959.jpg" rel = "prettyPhoto"> How the camera dug sand. Genius P-433 As the camera dug sand. Genius P-433 < a href = "https://usamodelkina.ru/uploads/posts/2021-07/1626614599_img_20210624_172124.jpg" rel = "prettyPhoto"> How the camera dug sand. Genius P-433 We'll have to draw in the air pump, a brush, a compressor with a hose and needles. As well as a microscope, view and clean the gears of the reducers and autofocus drives.
< img class = "aligncenter" alt = "As the camera dug sand. Genius P-433" src = "https://usamodelkina.ru/uploads/posts/2021-07/1626614590_img_20210528_161015.jpg"/> As the camera dug sand. Genius P-433 How the camera dug sand. Genius P- 433 As the camera dug sand. Genius P-433 < a href = "https://usamodelkina.ru/uploads/posts/2021-07/1626620989_igolki-med.jpg" rel = "prettyPhoto"> How the camera dug sand. Genius P- 433 As the camera dug sand. Genius P-433 < a href = "https://usamodelkina.ru/uploads/posts/2021-07/1626620990_toplivnyj-filtr.jpg" rel = "prettyPhoto"> How the camera dug sand. Genius P- 433 As the camera dug sand. Genius P-433 < a href = "https://usamodelkina.ru/uploads/posts/2021-07/1626620990_shlang-omyvatelja.jpg" rel = "prettyPhoto"> How the camera dug sand. Genius P- 433 I'll see what the Internet says about this model.
And so, I'll start digging a sandy quarry.
Cheerfully unscrew all the bolts of the front and rear panels. I begin to carefully remove the case. Of course, there is no manual service, as well as authorization.
Where ours did not disappear!
How they dug sand with a camera. Genius P-433 How the camera dug sand. Genius P-433 I removed the case.
I discharge the capacitor.
As the camera dug sand. Genius P-433 < a href = "https://usamodelkina.ru/uploads/posts/2021-07/1626614604_p1010009.jpg" rel = "prettyPhoto"> How the camera dug sand. Genius P-433 As the camera dug sand. Genius P-433 What something is wrong with the shutter speed on my working camera.
We'll have to shoot like that, there is no other at hand yet. Even a working client. Svetik gave everything away. Some broken lines are lying on the shelves.
I remove the flash unit, the designers turned out to be true to their concept here too. The boards are connected by pins.
As the camera dug sand. Genius P-433 < a href = "https://usamodelkina.ru/uploads/posts/2021-07/1626614609_p1010014.jpg" rel = "prettyPhoto"> How the camera dug sand. Genius P-433 I scattered the wires a little, I will not remove the display.
As the camera dug sand. Genius P-433 < a href = "https://usamodelkina.ru/uploads/posts/2021-07/1626614611_p1010020.jpg" rel = "prettyPhoto"> How the camera dug sand. Genius P-433 I need to disconnect the boards until I go to the “dirty room” to clean the sand. I will analyze more. First, the case, boards and battery compartment will be cleaned and blown out with a compressor. Separate lens.
Like a camera sand Genius P-433 As the camera dug sand. Genius P-433 < a href = "https://usamodelkina.ru/uploads/posts/2021-07/1626614614_p1010024.jpg" rel = "prettyPhoto"> As the camera dug sand. Genius P-433 As the camera dug sand. Genius P-433 < a href = "https://usamodelkina.ru/uploads/posts/2021-07/1626614615_p1010026.jpg" rel = "prettyPhoto"> How the camera dug sand. Genius P-433 How the camera dug sand. Genius P-433 < a href = "https://usamodelkina.ru/uploads/posts/2021-07/1626614617_p1010031.jpg" rel = "prettyPhoto"> How the camera dug sand. Genius P-433 A few more screws, finally disconnecting the boards and wiring a little.
How the camera dug sand. Genius P-433  As the camera dug sand. Genius P-433 How the camera dug sand. Genius P-433  As the camera dug sand. Genius P-433 Separate the lens. Despite my worst fears, there seems to be little sand, but fine in all places.
 As the camera dug sand. Genius P-433 As the camera dug sand. Genius P-433 < a href = "https://usamodelkina.ru/uploads/posts/2021-07/1626614622_p1010038.jpg" rel = "prettyPhoto"> How the camera dug sand. Genius P-433 Now you can also clean the relatively large elements of the case and the board. In the “special room”, to begin with, he went through all the places with a toothbrush, then blew it with a compressor. Brush again and then blow it out. Carefully scanned-clean. I put clean parts in a heap in a corner.
How they dug sand with a camera. Genius P-433 You can also do the lens.
Here the loops are connected by sector contacts and pressed with a bolt with a soft washer. This technique is often used in analog (film) cameras. Nowadays, you hardly find such a technique.
As the camera dug sand. Genius P-433 I warm up the yellow tape with a hair dryer, the glue has softened, carefully remove .
How the camera dug sand. Genius P-433 Removing the lens extension drive motor.
As the camera dug sand. Genius P-433 < a href = "https://usamodelkina.ru/uploads/posts/2021-07/1626614626_p1010048.jpg" rel = "prettyPhoto"> As the camera dug sand. Genius P-433 I unscrew the screws that secure the matrix and the back cover.
As the camera dug sand. Genius P-433 < a href = "https://usamodelkina.ru/uploads/posts/2021-07/1626614628_p1010053.jpg" rel = "prettyPhoto"> As the camera dug sand. Genius P-433 As the camera dug sand. Genius P-433 She practically no dust, all the sand is probably in the front of the lens.
As the camera dug sand. Genius P-433 Then I start cleaning the lens extension gear and autofocus drive. But already under a microscope, I carefully examine the teeth of the gears, clean them of the sand. I remove the stuck grains of sand with a thin needle.
 As the camera dug sand. Genius P-433 As the camera dug sand. Genius P-433 < a href = "https://usamodelkina.ru/uploads/posts/2021-07/1626614632_p1010061.jpg" rel = "prettyPhoto"> How the camera dug sand. Genius P-433 I also disassemble super small parts of the planetary gear.
How the camera dug sand. Genius P-433 Carefully, with a screech, I remove the first barrel of the lens. I remove the viewfinder unit, also clean it under a microscope. It all worked out with an enema. Blown away the dust particles.
As the camera dug sand. Genius P-433 < a href = "https://usamodelkina.ru/uploads/posts/2021-07/1626614635_p1010066.jpg" rel = "prettyPhoto"> How the camera dug sand. Genius P-433 As the camera dug sand. Genius P-433 Continue disassemble the lens, remove the pins and separate the barrels.
How they dug sand with a camera. Genius P-433 How the camera dug sand. Genius P-433  As the camera dug sand. Genius P-433 How the camera dug sand. Genius P-433 I disassembled a few more barrels, be careful not to break the plumes braided between the details. The whole process is accompanied by the crunch and squeak of fine white sand from the coral islands.
How the camera dug sand. Genius P-433  As the camera dug sand. Genius P-433 How the camera dug sand. Genius P-433  As the camera dug sand. Genius P-433 How the camera dug sand. Genius P-433 Shutter and aperture block.
I examine very carefully under a microscope.
How lucky I am, there is no need to disassemble this most complicated knot! Or a client?
Just a little dust, blown off, checked, ready. Once again under the microscope – clean!
How the camera dug sand. Genius P-433  As the camera dug sand. Genius P-433 Removing the pins, dismantling the last lens parts.
As the camera dug sand. Genius P-433 How the camera dug sand. Genius P-433 < a href = "https://usamodelkina.ru/uploads/posts/2021-07/1626614647_p1010089.jpg" rel = "prettyPhoto"> How the camera dug sand. Genius P-433 As the camera dug sand. Genius P-433 Frontal lens.
How the camera dug sand . Genius P-433 As the camera dug sand. Genius P-433 < a href = "https://usamodelkina.ru/uploads/posts/2021-07/1626614651_p1010093.jpg" rel = "prettyPhoto"> How the camera dug sand. Genius P-433 And once again I extract pins, that's all.
As the camera dug sand. Genius P-433 < a href = "https://usamodelkina.ru/uploads/posts/2021-07/1626614653_p1010096.jpg" rel = "prettyPhoto"> How the camera dug sand. Genius P-433 As the camera dug sand. Genius P-433 Enough I cleaned all the details for a long time and several times.
Carefully looking for “cleanliness”.
Enemy grains of sand emerge from nowhere and electrified from the astral plane.
Cleaning and blowing are finished. I put everything in a container and close the lid.
I use these and all other varieties.
How the camera dug sand. Genius P-433 In them I unload disassembled devices awaiting the client's decision for repair. Many different uses.
Now folded to protect against dust particles. After fiddling with sand, hold the vacuum cleaner in your hands and go. Then I wipe everything around with a wet cloth and turn on the humidifier.
I really don't want to find a speck of dust or a grain of sand in the assembled camera.
Now you can collect.
Done, you can see beautiful pictures.
 As the camera dug sand. Genius P-433 As the camera with a Genius P was digging sand 43 As the camera dug sand. Genius P-433 As the camera dug sand-433 The question topic is automatically published in the social. site network – follow the answers there too:

Source:

usamodelkina.ru

Show More

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Check Also
Close
Back to top button