DIY

Simple Work Glove Dryer

Simple dryer for work gloves The author complains: when he makes his crafts in such heat, gloves quickly get wet from sweaty palms, and when he takes them off again tries to put on, there is inconvenience in putting on, and for some reason he does not like it. Therefore, the author tried to make a device that can quickly dry gloves out of available devices in everyday life.
 Simple dryer for work gloves For work you will need:
– Desktop fan = 1
– Aluminum wire with a diameter of 3 mm about = 1 m
– Aluminum plate (about 3 * 20 cm) = 2
– Screws with drill = 2
– Pliers
– Drill
Work gloves are indispensable for making homemade products. The author uses them every time he makes crafts (except in cases where it is dangerous – when working with a power tool), but he could not change them for new ones every time he took off his gloves, because his hands were sweating and the gloves were heavy to wear.
Simple work glove dryer Even if the gloves are exposed to the wind from the blower, the manner and angle of the glove does not affect drying, and this is time-consuming and labor-intensive. Therefore, the author thought that the device should be designed so that the wind blew well directly into the gloves, and he remade the wind blower.
 Simple dryer for work gloves It's good that you had a blower with two air outlets at hand! The author disassembled it.
Simple dryer for work gloves insects, sawdust and dust are sucked into the inlet, and then get inside the gloves. Therefore, it is worth considering a primary mesh that you can put on at the inlet of a wind blower.
Simple dryer for work gloves The author chose the size that perfect for inlet! He just put on the filter and checked how the wind blower was going.
 Simple work gloves dryer After that, the author noticed that the soldering of the wiring turned out to be frail, he soldered it himself.
< img class = "aligncenter" alt = "Simple dryer for work gloves" src = "https://usamodelkina.ru/uploads/posts/2021-08/1628163966_07.jpg"/> Next, aluminum (duralumin) is used plate. You need to cut two about 3 × 20 cm. On one side, the corners are cut off.
Simple dryer for work gloves Then you need to make holes for the screws in the upper part of the blower outlet holes, as well as drill one hole in the aluminum (duralumin) plates.
Simple dryer for work gloves The author inserted plates that cut out earlier, and secured them with screws. The main work is done!
Simple dryer for work gloves The author immediately puts gloves on the plates. When the wind blower is turned on, the air flow enters the inside of the gloves, blowing them from the inside. Drying time has decreased significantly.
 Simple dryer for work gloves The inventor also tried to use a conventional desktop fan. “https://usamodelkina.ru/uploads/posts/2021-08/1628163967_12.jpg” rel = “prettyPhoto”>Simple dryer for work gloves For this he uses aluminum wire with a diameter of 3 mm. Inserts a cut piece (about 40-50 cm) into the fan cover.
Simple dryer for work gloves Attaches a curved piece of wire as shown in the photo below, bending the wire with pliers. The author fixes the wire so that it does not fall off, even with a little effort. (For a better understanding, you need to bend the wire into an L-shape and thread it through the protective mesh of the fan.)
Simple dryer for work gloves That's it! The dryer is ready! There are different types of blowers, but the standard type of fan is much simpler and the author recommends using it.
 Simple dryer for work gloves The author shares his impressions: “when I put gloves on the fan wire … does it look like a ghost's hand? When you shake your head, it seems that these hands are moving, and people who saw it without knowing it were scared!” > Simple dryer for work gloves The device is used mainly during breaks, and this is enough to dry the gloves. The wind penetrates the inside of the gloves, and the author could use the gloves comfortably every time. The rest of the time can be used like a regular fan, the device is surprisingly versatile because it can also be used with caps, towels and socks.
 Simple dryer for work gloves

Source:

usamodelkina.ru

Show More

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button