List of materials:
– reducer from a grinder;
– a plastic barrel with a lid;
– bolts and nuts;
– a sheet of steel;
– a piece of pipe for a handle;
– plastic ties or wire.
List of tools:
– welding machine;
– tape measure, marker.
The process of making homemade products:
Step one. Preparation of parts
Two washers must be cut out of the sheet of steel, which will be bolted to the cover.
A piece of pipe is welded to the output of the gearbox, where the anchor used to be, this will be the shaft that will rotate the brushes. As for the brushes, these are ordinary brushes for cleaning the floor, we cut off the excess and attach them to the shaft with plastic clamps. You will also need to weld a simple handle from the pipe.
< a href = "https://usamodelkina.ru/uploads/posts/2021-08/1629826859_screenshot_2.jpg" rel = "prettyPhoto"> < a href = "https://usamodelkina.ru/uploads/posts/2021-08/1629826860_screenshot_4.jpg" rel = "prettyPhoto"> < a href = "https://usamodelkina.ru/uploads/posts/2021-08/1629826862_screenshot_6.jpg" rel = "prettyPhoto"> < a href = "https://usamodelkina.ru/uploads/posts/2021-08/1629826863_screenshot_8.jpg" rel = "prettyPhoto"> Step two. Build
We attach two sheet steel washers to the plastic barrel lid, as a result, we get a reliable base. Next, we attach the gearbox to the washers; as planned, it should increase the speed. That's all, the washing machine is almost ready, we install the handle from the pipe to bring the machine to work with muscular strength.
< a href = "https://usamodelkina.ru/uploads/posts/2021-08/1629826864_screenshot_10.jpg" rel = "prettyPhoto"> < a href = "https://usamodelkina.ru/uploads/posts/2021-08/1629826866_screenshot_12.jpg" rel = "prettyPhoto"> < a href = "https://usamodelkina.ru/uploads/posts/2021-08/1629826867_screenshot_14.jpg" rel = "prettyPhoto"> Step three. Challenges
Fill in the powder, pour in warm water and can be washed. We rotate the handle in different directions, simulating the operation of an automatic washing machine. After a while, the laundry can be taken out and the water drained. If you wish, you can immediately rinse it, pouring clean water into the barrel, and so on until the bitter end. Either way, washing by hand just got easier.
< a href = "https://usamodelkina.ru/uploads/posts/2021-08/1629826869_screenshot_16.jpg" rel = "prettyPhoto"> < a href = "https://usamodelkina.ru/uploads/posts/2021-08/1629826870_screenshot_18.jpg" rel = "prettyPhoto"> This project is completed, I hope you liked the homemade product and you have found useful thoughts for yourself. Good luck and creative inspiration if you decide to do this again. Don't forget to share your ideas and homemade products with us!